An increasingly important role in our lives play a variety of gadgets. But leadership confidently hold cell phones, because they include a camera, organizer, camera, media player, not to mention their primary means of communication function.
To this faithful companion of man he served as long as possible, it is necessary to protect against dust, dirt and minor mechanical damage. Guarantees this protection cover. In addition, it allows the phone look more elegant, and its owner - to show your style.
On sale is a set of covers for mobile phones of different materials, the most popular of which silicone. Silicone product pleases the price and the variety of shapes and colors, but for all its virtues, he has a pair of negative qualities - quickly soiled and requires caution when cleaning.
Content
- Methods of cleaning silicone cover
- Soap or dishwashing detergent
- school eraser
- Baking soda and toothpaste
- Alcohol and nail polish remover
- Return of whiteness and silicone coating
- Operation Tips
Methods of cleaning silicone cover
Before starting any cleaning cover must be removed to prevent damage to the phone inside. Make it easy. Silicone products are particularly kaomku. It goes along the edge of the screen, not allowing the gadget to fall. Carefully and gently take the corner kaomki and turn down it, then carefully contractible cover. Now you can start cleaning.
Soap or dishwashing detergent
Wash the surface contamination of the conventional soap or dishwashing detergent. The small capacity pour warm water, put to the soap or add some drops of detergent foam whisk. Omit Silicone Case in soapy water for about half an hour. Then, as necessary gently rubbed with a sponge dirt. Well wash the product with clean water. It remains to wipe it dry.
school eraser
Traces of a ballpoint pen can erase light school eraser. Take a clean, dry eraser and three their pollution. After that with a cotton pad moistened with any alcohol-containing liquid (conditioner, cologne) to wipe product.
Baking soda and toothpaste
Clear contamination with silicone, you can use baking soda. In a small container pour a teaspoon of baking soda, add a little water into it to get mush. Gently mixture is applied to cover the contaminated surface and allow to dry. Scour the dirt from the product is not necessary, it can damage silicone. After drying ash is shaken off, the product was washed with cold water.
AT removing traces of ballpoint pen More can help toothpaste. The contaminated place we put toothpaste. We leave it for 20 minutes, then rubbed with a cotton cloth or a soft disc. Clean repeat if necessary.
Alcohol and nail polish remover
Equally proven is effective in a conventional alcohol as a cleaning agent (vodka). On a cotton ball or soft cloth you need to apply a little alcohol, and then gently rub soiled them of the case. Specific bad smell quickly evaporate.
Before you can use nail polish remover as a cleaning agent, it is better to check its impact on the silicone on the inside of the product. If the result is satisfied, it is necessary to moisten nail polish remover cotton pad and gently rub the soiled surface, rinse with water, removing the remains of the cleaning agent and wipe dry. This cleaning method to be very careful to use, if the phone cover color, or it there is a picture, as there is risk of spoiling the appearance of the product.
Wash the silicone case is not difficult, but sometimes just make it clean is not enough to ensure that the product has acquired its former appearance.
Return of whiteness and silicone coating
If the original white cover over the lifetime of darkened, turned yellow, then try to put it back on a white background may be using aggressive cleaning agents.
Before you let them move, you need to keep in mind that the products are of low quality not withstand such cleaning, And expensive silicone covers bleach to be very careful. For work, we need any solvent: acetone, benzene, chlorine bleach or citric acid. On a cotton pad or cloth and we plot the solvent wipe product. Then rinse it well and wipe dry.
Painting silicone products need iodine and permanent marker desired shade. Next steps are simple:
- cotton swabs dipped in iodine and carefully plot the substance at the seams;
- gently and carefully paint over the entire surface of the marker cover.
Do not be afraid of the result. A few days later the iodine to evaporate, and color, wrought marker reliably absorbed by the silicone products.
Operation Tips
To cover not lost its transparency, should be regularly wipe it with a damp cloth or cloth. This will prevent the product from contamination before they are soaked in silicone. A good analogy is less maintenance-free, can be a case of matte silicone. It needs to be only occasionally washed in soapy water, then rinsed in running water and dry it thoroughly.
